400和410型無顯示器部件零件
- 產品型號：
- 更新時間：2023-12-17
- 產品介紹：400和410型無顯示器部件零件Sample Pump （Sensidyne A） for Models 400 and 410 Nitric Oxide MonitorsSKU: NOPUMPSAMPLE
- 廠商性質：代理商
- 在線留言
產品介紹
| 品牌 | 其他品牌 | 價格區間 | 面議 |
|---|---|---|---|
| 組件類別 | 光學元件 | 應用領域 | 醫療衛生,環保,化工,電子/電池 |
400和410型無顯示器部件零件
| Sample Pump (Sensidyne A) for Models 400 and 410 Nitric Oxide Monitors SKU: NOPUMPSAMPLE |
| Ozone Pump (Sensidyne A) for Model 400 Nitric Oxide Monitor SKU: NOPUMPOZONE Note that this pump is for the Model 400 NO Monitor. The Model 410 does not require an Ozone Pump. |
| Total Flow Pump (Sensidyne A) for Models 400 and 410 Nitric Oxide Monitors SKU: NOPUMPTOTAL |
| Total Flow Meter Assembly for Model 400 and 410 Nitric Oxide Monitors SKU: FLOWMETER(TOTALFLOW)410 |
| Ozone Flow Meter Assembly for Models 400 and 410 Nitric Oxide Monitors SKU: FLOWMETER(OZONEFLOW)410 |
| Sample Flow Meter Assembly for Model 400 and 410 Nitric Oxide Monitors SKU: FLOWMETER(SAMPLEFLOW)410 |
| Needle Valve for Flow Control SKU: NDLVLV |
| Lamp Assembly for Models 400 and 410 Nitric Oxide Monitor SKU: NOLAMPAS |
| Quartz Absorption Cell for Model 400 and 410 Nitric Oxide Monitors SKU: NOCELL |
| Photodiode Assembly for Models 400 and 410 Nitric Oxide Monitors SKU: PDASSEMBLY410 |
| LCD Assembly for Models 400 and 410 Nitric Oxide Monitors SKU: NODSP |
| NO Valve for Models 400 and 410 Nitric Oxide Monitor, Nickel-Plated Brass SKU: NOVLVNO |
| Ozone Valve for Models 400 and 410 Nitric Oxide Monitors, Stainless Steel SKU: NOVLVOZ |
| Ozone Source for Models 400 and 410 Nitric Oxide Monitors SKU: OZSOURCE |
| Reaction Coil for Models 400 and 410 Nitric Oxide Monitors SKU: REACTIONCOIL |
| Adapter Box for Model 410/Model 401 Combination SKU: 410ADAPTERBOX
To be used when connecting the Model 410 directly to a computer with the 9PinF-9PinF serial cable without going through a Model 401 NO2 Converter. |
| Select Switch for Model 400 and 410 NO Monitors SKU: SELECTSWITCH410 |
| Power Pack for Models 211, 306, 400, 408, 410 and Ozone Monitors with External Pump, 100-240 VAC Input, 2.5 Amp Output at 12 V SKU: PWRPK-2.5 A
In the shopping cart, you will be asked to specify the country for the AC plug. |
| Internal Power Jack and Cable for Models 202, 205, 306, 400, 410 SKU: PWRASSY |
| Serial Connector (Internal) SKU: SERCON
Mounts to instrument case. |
| Serial Cable for Connection Between Model 400 or Model 410 NO Monitor and Model 401 NO2 Converter SKU: SERCABL410/401
9 pin, Male-to-Male Serial Cable for passing power and data between the Model 400 or 410 NO Monitor and the Model 401 NO2 Converter |
| Serial-to-USB Adapter for Model 400 and 410 Nitric Oxide Monitors SKU: SERUSB410 |
| Serial Cable for Connecting Instrument to Computer SKU: SERCABL
This straight-through,female-female, 9-pin serial cable is required for RS232 communication with all 2B Tech instruments. Note: Serial cables purchased through electronics stores are usually "cross over" (pins 1 and 3 cross over) and not "straight through" and won't work with 2B Tech instruments. |
| Particle Filter Housing for 47-mm Filters SKU: FILTERHS(47mm) |
| Package of Ten 47-mm Diameter, 5-6 Micron Pore Size Teflon Particle Filters SKU: FILTERPK(47mm) |
| DEW-Line Consisting of Two Nafion Tubes in Parallel for Humidity Equilibration in Models 106-L, 106-M, 202, 205 and 400 SKU: DEW
Two Dew-Lines are required for the Model 205 Dual Beam Ozone Monitor because of the two flow paths. |
| Internal Ozone Scrubber for Model 410 NO Monitor |
| Internal NO Scrubber for Model 410 Nitric Oxide Monitor |
| External NOx Scrubber for Models 400 and 410 This scrubber removes both NO and NO2 from sampled air. It is attached to the inlets of the Models 400 and 410 Monitors to determine the zero offset. |
| Cleaning Loop set for Models 202, 205, 400 and 410 SKU: CLEANLOOP |
| Model 410 Field Kit: Spare parts kit including: 1 Total Flow Pump, 1 Sample Pump, 1 Ozone Valve, 1 NO Valve, 1 External NOx Scrubber, 1 Lamp Assembly; 2 Internal NO Scrubbers, 2 DewLine Assemblies SKU: FIELDKIT410 |
- 上一篇：401型NO2轉換器配件
- 下一篇：306型臭氧校準源零件
